Network Router User Manual

ManualsBrandsBrocade Communications Systems ManualsNetwork RouterLayer 3 Routing Configuration ICX 6650

Brocade ICX 6650 Layer 3 Routing Configuration Guide 1

53-1002603-01

Chapter

IP Configuration

Table 1 lists the IP features Brocade ICX 6650 devices support. These features are supported with

the full Layer 3 software image, except where explicitly noted.

TABLE 1 Supported IP features

Feature Brocade ICX 6650

BootP/DHCP relay Yes

Specifying which IP address will be

included in a DHCP/BootP reply packet

Yes

DHCP Server Yes

DHCP Client-Based Auto-Configuration Yes

DHCP Client-Based Flash image

Auto-update

Yes

DHCP assist Yes

Equal Cost Multi Path (ECMP) load sharing Yes

IP helper Yes

Single source address for the following

packet types:

• Telnet

• TFTP

• Syslog

• SNTP

• TACACS/TACACS+

• RADIUS

• SSH

• SNMP

Yes

IPv4 point-to-point GRE IP tunnels Yes

Routes in hardware maximum:

Up to 7168 routes

Yes

Routing for directly connected IP subnets Yes

Virtual Interfaces:

Up to 512 virtual interfaces

Yes

31-bit subnet mask on point-to-point

networks

Yes

Address Resolution Protocol (ARP) Yes

Reverse Address Resolution Protocol

(RARP)

Yes

IP follow Yes

Proxy ARP Yes