Installation guide

FIGURE 12 4-post screws and retainer nuts
NOTE
Do not use the hardware supplied in a 2-post rack mounting kit to mount a Brocade ICX 6650 in a 4-
post rack. Mounting the device in a 4-post rack requires additional hardware to prevent drooping from
possible flexing and distortion of the 4-post rack when a device is not properly installed.
2. Attach the mounting brackets to the sides of the device as illustrated in 2-post rack mount installation
on page 28 using the 8-32 x 5/16 in. screws.
3. Attach the appropriate rails: either side attach or rear attach as determined by the type of rack in
which you are installing the device.
The following figures show exploded views of the optional 4-post rack mount kit.
FIGURE 13 Optional 4-post rack mount kit, rear attachment
Installing the Brocade ICX 6650
Brocade ICX 6650 Hardware Installation Guide 31
53-1003398-01