Installation guide

FIGURE 9 2-post screws and retainer nuts
2. Attach the mounting brackets to the sides of the device using the 8-32 x 5/16 in. screws.
FIGURE 10 Attaching the mounting brackets for a Brocade ICX 6650
3. Position the device in the cabinet, providing temporary support under the switch until the rail kit is
secured to the cabinet.
4. Attach the front right bracket to the rail rack using two 10-32 x 5/8 in. screws and the appropriate
round-hole or square-hole retainer nuts. Refer to the following figure.
Installing the Brocade ICX 6650
Brocade ICX 6650 Hardware Installation Guide 29
53-1003398-01