Installation guide

Brocade ICX 6430-C Compact Switch Hardware Installation Guide 27
53-1002817-02
Installing the device
2
Mounting the device on a metal surface or metal wall
NOTE
When mounting the device on a vertical metal surface, Brocade recommends that you mount the
device with the port side down.
Complete the following steps to securely mount an ICX 6430-C device on a metal surface or metal
wall:
1. Ensure that the magnet sheet is attached to the bottom panel of the device. See “” and
Figure 15.
2. Place the magnet sheet (with the logo side now attached to the bottom panel of the device)
against the metal surface or metal wall. See Figure 16 and Figure 17.
FIGURE 16 Mounting an ICX 6430-C device to a metal surface using the magnet mount