Installation guide

18 Brocade ICX 6430-C Compact Switch Hardware Installation Guide
53-1002817-02
Installing the device
2
FIGURE 9 Installing the device in a two-post rack
6. If installing a single device only, proceed to “Powering on the system” on page 30. If installing
multiple devices, mount them in the rack, one below the other.
Wall mount installation
Use the following items to wall mount the device directly to a wall:
• #2 Phillips screwdriver
• Hammer
• Drill
• Wall mount anchors
• Wall mount screws
• Wall Mount Holes Location template
• tape
To mount the device to a wall using the wall mount brackets, see “Wall mount installation using
wall mount brackets”.
NOTE
When mounting the device on a wall, Brocade recommends that you mount the device with the port
side down.
1
Rack-mounting screws
2Cage nuts