Installation guide

Brocade ICX 6430-C Compact Switch Hardware Installation Guide 15
53-1002817-02
Installing the device
2
• Mechanical loading: Do not place any equipment on top of a rack-mounted unit.
• Circuit overloading: Be sure that the supply circuit to the rack assembly is not overloaded.
• Grounding: Rack-mounted equipment should be properly grounded.
Installing the device
You can install the device on a desktop, an equipment rack, a wall, or on a metal surface:
• “Desktop installation”
• “Rack mount installation”
• “Wall mount installation”
• “Wall mount installation using wall mount brackets”
• “Mounting the device with a magnet”
DANGER
Mount the devices you install in a rack or cabinet as low as possible. Place the heaviest device at
the bottom and progressively place lighter devices above.
Desktop installation
Complete the following steps to install the ICX 6430-C device on a desktop or other flat surface.
FIGURE 7 Attaching the adhesive feet