Installation guide

Brocade ICX 6430-C Compact Switch Hardware Installation Guide 7
53-1002817-02
Port, system, and power status LEDs
1
TABLE 4 Network connection-related LED states
LED Desired
state
Meaning Abnormal state Meaning or action
Ethernet
(1-12, Slot 1)
Link/Act
On or
flashing
(Green)
The port has established
a valid link at 10, 100 or
1000 Mbps. Flashing
indicates the port is
transmitting and receiving
user packets.
Off A link is not established with the
remote port. You can do the following:
• Verify that the connection to the
other network device has been
properly made. Also, make
certain that the other network
device is powered on and
operating correctly.
• Verify that the port has not been
disabled through a configuration
change. You can use the CLI. If
you have configured an IP
address on the device, you also
can use the Web management
interface or Brocade Network
Advisor.
• If the other actions do not
resolve the problem, try using a
different port or a different
cable.
PoE/PoE+
(1-4, Slot 1)
On (Green) The port is providing PoE
or PoE+ power to a
connected device.
Off A link is not established with the PoE
device. You can do the following:
• Verify that the connection to the
other network device has been
properly made.
• If the other actions do not
resolve the problem, try using a
different port or a different
cable.