Installation guide

6 Brocade ICX 6430-C Compact Switch Hardware Installation Guide
53-1002817-02
Port, system, and power status LEDs
1
FIGURE 5 System status LEDs on an ICX 6430-C12 device
Table 3 lists the system status LEDs on an ICX 6430-C device and their corresponding conditions
and status.
Network connection status LEDs
After you install the network cables, you can observe certain LEDs to determine if the network
connections are functioning properly. Table 4 outlines the LEDs related to the network connections,
the desired state of each LED, possible abnormal states of each LED, and what to do if an LED
indicates an abnormal state.
1System status LEDs
TABLE 3 System status LEDs
LED Condition Status
PWR
(Power)
Green Power supply is operating normally.
Amber Power supply fault.
Off Power supply off.
Diag
(Diagnostic)
Flashing Green System self-diagnostic test in progress. System reloads automatically.
Steady Amber System self-diagnostic test has detected a fault. (Fan, thermal, or any
interface fault.) The user must reload the system.
Steady Green System self-diagnostic test passed.
Uplink
(Reserved for future
use)
Off LED is reserved for future use.
Downlink
(Reserved for future
use)
Off LED is reserved for future use.
ID (1-4)
(Reserved for future
use)
Off LED is reserved for future use.