Installation guide

Brocade ICX 6430-C Compact Switch Hardware Installation Guide 5
53-1002817-02
Port, system, and power status LEDs
1
FIGURE 4 Port status LEDs an ICX 6430-C12 device
Table 2 lists the port status LEDs on an ICX 6430-C device and their corresponding conditions and
status.
System status LEDs
Figure 5 shows the location of the system status LEDs on an ICX 6430-C device.
1Port status LEDs
2 PoE/PoE+ LEDs
TABLE 2 Port status LEDs
LED Condition Status
Out-of-band
management
port (2 LEDs)
Off (right side) Offline
On/Flashing (left side) Link-up. Flashing indicates the port is transmitting and receiving
user packets.
On/Green (right side) 1 Gbps Link-up
Right LED off, left LED
on or flashing
10/100 Mbps Link-up. Flashing indicates the port is transmitting
and receiving user packets.
1GbE ports
(1 - 12, Slot 1)
Link/Act
Off (right side) The right LED on the ports indicates PoE/PoE+ activity and is only
active on ports 1-4. On non-PoE/PoE+ ports, the right LED
remains off.
Off (left side) A link is not established with a remote port.
On/Flashing Green
(left side)
The port has established a valid link at 10, 100 or 1000 Mbps.
Flashing indicates the port is transmitting and receiving user
packets.
PoE/PoE+
(1 - 4)
On/Green (right side) The port is providing PoE or PoE+ power to a connected device.
Off (right side) The port is not providing PoE or PoE+ power.
100/1GbE RJ45
ports
(C1 - C2, Slot 2)
Link/Act
On/ Flashing Green The port is operating at 1 Gbps. Flashing indicates the port is
transmitting and receiving user packets at 1 Gbps.
Off A link is not established with a remote port.
100/1GbE SFP
ports
(F1 - F2, Slot 3)
Link/Act
On/ Flashing Green The SFP port is operating at 1 Gbps. Flashing indicates the port is
transmitting and receiving user packets at 1 Gbps.
Off A link is not established with a remote port.