Technical data

62 Fabric OS Encryption Administrator’s Guide (DPM)
53-1002720-02
Configuring encryption storage targets
2
FIGURE 45 Configuration Status screen
The screen contains the following information:
• Device: The device type (target or host).
• Device Port WWN: The port world wide name.
• Represented by VI/VT: The virtual target (VT) mapped to the physical target or virtual
initiator (VI) representing the host.
• VI/VT Port WWN: The port world wide name of the virtual target or virtual initiator.
• VI/VT Node WWN: The node world wide name of the virtual target or virtual initiator.
13. Review any post-configuration instructions or messages, which you can copy to a clipboard or
print for later, then click Next.
The Next Steps screen displays (Figure 46). Post-configuration instructions for installing public
key certificates for the encryption switch are displayed. These instructions are specific to the
key vault type.