Technical data

Fabric OS Encryption Administrator’s Guide (DPM) 109
53-1002720-02
Viewing and editing switch encryption properties
2
Switch Status: The health status of the switch. Options are:
Healthy
Marginal
Down
Unknown
Unmonitored
Unreachable
Switch Membership Status: The alert or informational message description, which details
the health status of the switch. Options are:
Group Member
Leader-Member Comm
Error
Discovering
Not a member
Encryption Group: The name of the encryption group to which the switch belongs.
Encryption Group Status: Status options are:
OK/Converged: the group leader can communicate with all members
Degraded: the group leader cannot communicate with one or more members. The
following operations are not allowed: key vault changes, master key operations,
enable/disable encryption engines, Failback mode changes, HA Cluster creation or
addition (removal is allowed), tape pool changes, and any configuration changes for
storage targets, hosts, and LUNs.
Unknown: The group leader is in an unmanaged fabric.
Fabric: The name of the fabric to which the switch belongs.
Domain ID: The domain ID of the selected switch.
Firmware Version: The current encryption firmware on the switch.
Key Vault Type: Options are:
RSA Data Protection Manager (DPM): NOTE: If an encryption group contains mixed
firmware nodes, the Encryption Group Properties Key Vault Type name is based on the
firmware version of the group leader. For example, If a switch is running Fabric
OS 7.1.0 or later, the Key Vault Type is displayed as “RSA Data Protection Manager
(DPM).”If a switch is running Fabric OS prior to v7.1.0, Key Vault Type is displayed as
RSA Key Manager (RKM)”.
Primary Key Vault Link Key Status/Backup Key Vault Link Key Status:: (LKM/SSKM key
vault only.) Shown as Not Used.
Primary Key Vault Connection Status/Backup Key Vault Connection Status: Whether the
primary key vault link is connected. Options are:
Unknown/Busy
Key Vault Not Configured
No Response
Failed authentication
Connected.