Technical data

108 Fabric OS Encryption Administrator’s Guide (DPM)
53-1002720-02
Viewing and editing switch encryption properties
2
Viewing and editing switch encryption properties
To view switch encryption properties, complete the following steps:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
dialog box. (Refer to Figure 6 on page 14.)
2. Select a switch or encryption engine from the Encryption Center Devices table, then select
Switch/Engine > Properties from the menu task bar, or right-click a switch or encryption engine
and select Properties.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Properties icon.
The Encryption Switch Properties dialog box displays (Figure 80).
FIGURE 80 Encryption Switch Properties dialog box
The dialog box contains the following information:
• Switch Properties table: A list of properties associated with the selected switch
• Name: The name of the selected switch
• Node WWN: The world wide name of the node