Technical data

Fabric OS Encryption Administrator’s Guide (DPM) 103

53-1002720-02

Rekeying all disk LUNs manually

FIGURE 77 Encryption Target Disk LUNs dialog box

4. Click Add.

The Add Disk LUNs dialog box displays. This dialog box includes a table of all LUNs in the

storage device that are visible to the hosts.

5. Click Re-keying Details.

The LUN Re-keying Details dialog box displays. The dialog box contains the following

information:

• Key ID: The LUN key identifier.

• Key ID State: The state of the LUN rekeying operation.

• Encryption Algorithm: The algorithm of the LUN rekeying operation.

• Re-key Session Number: The session number of the LUN rekeying operation.

• Re-key Role: The role of the LUN rekeying operation.

• Re-key State: The state of a manual LUN rekeying operation. Options are:

• Read Phase

• Write Phase

• Pending

• Disabled

• Block Size: The block size used on the LUN.

• Number of Blocks: The number of blocks written.

• Current LBA: The Logical Block Address (LBA) of the block that is currently being written.

• Re-key Completion: The status of the LUN rekeying operation’s progress.