Technical data

68 Converged Enhanced Ethernet Command Reference
53-1002508-01
exit
2
exit
Exits the current mode and returns to the previous mode.
Synopsis exit
Operands None
Defaults None
Command
Modes
All command modes
Description Use this command to exit the current mode, and return to the previous mode. When used in EXEC
and privileged EXEC modes, the exit command terminates the session. See “CEE CLI command
modes” on page 3.
Usage
Guidelines
None
Examples To exit the Interface configuration mode, and return to the global configuration mode:
switch(config)#interface tengigabitethernet 0/0
switch(conf-if-te-0/0)#exit
switch(config)#exit
See Also disable, enable, end