Technical data

52 Converged Enhanced Ethernet Command Reference
53-1002508-01
dot1x port-control
2
dot1x port-control
Controls the authorization of a port state.
Synopsis dot1x port-control {auto | force-authorized | force-unauthorized}
no dot1x port-control
Operands auto Enables authentication on a port.
forced-authorized Forces a port to remain in an authorized state.
force-unauthorized
Forces a port to remain in an unauthorized state.
Defaults The default port state is auto.
Command
Modes
Interface configuration mode
Description Use this command to control the authorization of a port state. Use the no dot1x port-control
command to return to the default setting.
Usage
Guidelines
None
Examples To enable the port state to auto:
switch(config)#interface tengigabitethernet 0/1
switch(conf-if-te-0/1)#dot1x port-control auto
See Also None