Technical data

Converged Enhanced Ethernet Command Reference 25
53-1002508-01
clear ip igmp group
2
clear ip igmp group
Clears information related to learned groups in the IGMP module.
Synopsis clear ip igmp group {A.B.C.D {interface tengigabitethernet slot/port | interface port-channel
number | interface vlan vlan_id} | interface tengigabitethernet slot/port | interface port-channel
number | interface vlan vlan_id}
Operands A.B.C.D Specifies the group address, as a subnet number in dotted decimal format
(for example, 10.0.0.1), as the allowable range of addresses included in the
multicast group.
interface tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
interface port-channel number
Specifies the interface is a port-channel. The range of valid values is from 1
through 63.
interface vlan vlan_id
Specifies which VLAN interface to display the snooping configuration-related
information. The range of valid values is from 1 through 3583.
Defaults None
Command
Modes
Privileged EXEC mode
Description Use this command to clear the group information in the IGMP database, including entries for either
a specific group on all interfaces or specific groups on specific interfaces.
Usage
Guidelines
None
Examples To clear information for a learned group:
switch#clear ip igmp group 10.0.0.1 interface tengigabitethernet 0/1
See Also None