Technical data

Converged Enhanced Ethernet Command Reference 15
53-1002508-01
advertise optional-tlv
2
advertise optional-tlv
Advertises the optional TLVs.
Synopsis advertise optional-tlv {management-address | port-description | system-capabilities |
system-description | system-name}
no advertise optional-tlv
Operands management-address
Describes the MAC address or IP address of the switch.
port-description Describes information about the interface. This includes the name of the
manufacturer, the product name, and the version of the interface hardware
or software.
system-capabilities Describes the capabilities of the device and its primary function.
system-description Describes the system firmware version and the current image running on the
system. This value is defined by the system-description command.
system-name Describes the name of the system. This value is defined by the system-name
command.
Defaults Advertise is enabled.
Command
Modes
Protocol LLDP configuration mode
Description Use this command to display the optional TLVs. Use the no advertise optional-tlv command to
return to the default setting.
Usage
Guidelines
None
Examples The following examples show how to advertise all of the options:
switch(conf-lldp)#advertise optional-tlv management-address
switch(conf-lldp)#advertise optional-tlv port-description
switch(conf-lldp)#advertise optional-tlv system-capabilities
switch(conf-lldp)#advertise optional-tlv system-name
switch(conf-lldp)#advertise optional-tlv system-description
See Also system-description, system-name