Technical data

Converged Enhanced Ethernet Command Reference 249
53-1002508-01
terminal length
2
terminal length
Sets the number of lines to display on a screen.
Synopsis terminal length number
Operands number Specifies the number of lines to display on a screen. The range of valid values
is from 0 through 512.
Defaults The default length is 24.
Command
Modes
Privileged EXEC mode
EXEC mode
Description Use this command to set the number of lines to display on the screen.
Usage
Guidelines
If 0 (zero), the switch does not pause between screens of output.
Examples To set the number of lines to display on the screen to 30:
switch#terminal length 30
See Also None