Technical data

226 Converged Enhanced Ethernet Command Reference
53-1002508-01
show vlan classifier
2
show vlan classifier
Displays information about a specific VLAN classifier group.
Synopsis show vlan classifier {rule rule_id | group number | interface {group group number | port-channel
number | tengigabitethernet slot/port}
Operands rule rule_id Specifies the VLAN identification rule. The range of valid values is from 1
through 256.
group number Specifies the VLAN classifier group number. The range of valid values is from
1 through 16.
interface group number
Specifies the VLAN classifier interface group number. The range of valid
values is from 1 through 16.
interface port-channel number
Specifies the VLAN classifier port-channel number. The range of valid values
is from 1 through 63.
interface tengigabitethernet
Specifies a valid 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number
Defaults None
Command
Modes
Privileged EXEC mode
EXEC mode
Description Use this command to display information about all configured VLAN classifier groups or a specific
VLAN interface group.
Usage
Guidelines
If a group ID is not specified, all configured VLAN classifier groups are shown. If a group ID is
specified, a specific configured VLAN classifier group is shown.
Examples To display the VLAN classifier for group 1:
switch#show vlan classifier group 1
vlan classifier group 1 rule 1
See Also None