Technical data

Converged Enhanced Ethernet Command Reference 193
53-1002508-01
show qos queue interface
2
show qos queue interface
Displays the runtime state retrieved from the interface reflecting the number of packets and bytes
sent and received for each priority.
Synopsis show qos queue interface {tengigabitethernet slot/port | all}
Operands tengigabitethernet
Specifies the 10 Gbps Ethernet interface.
slot Specifies the 10 Gbps Ethernet interface line card slot number.
port Specifies the 10 Gbps Ethernet interface port number within the line card.
all Reports QoS statistics for all interfaces within the system.
Defaults None
Command
Modes
Privileged EXEC mode
EXEC mode
Description Use this command to display the runtime state retrieved from the interface reflecting the number of
packets and bytes sent and received for each priority.
Usage
Guidelines
For a stand-alone switch, all ASICs are considered as slot number zero (0).
Examples To display the queueing information for a 10 Gbps Ethernet interface:
switch#show qos queue interface tengigabitethernet 0/2
Interface TenGigabitEthernet 0/2
RX RX TX TX
CoS Packets Bytes TC Packets Bytes
------------------------------- -------------------------------
0 680458 87098624 0 0 0
1 0 0 1 32318 0
2 0 0 2 0 0
3 0 0 3 0 0
4 0 0 4 0 0
5 0 0 5 0 0
6 0 0 6 0 0
7 0 0 7 0 0
See Also qos map cos-mutation, cee-map