Technical data

192 Converged Enhanced Ethernet Command Reference
53-1002508-01
show qos maps
2
show qos maps
Displays information on the defined QoS maps.
Synopsis show qos maps {[cos-mutation [name]] | [cos-traffic-class [name]]}
Operands cos-mutation Specifies to report on all CoS-to-CoS mutation QoS maps.
name Specifies to report on only the named CoS-to-CoS mutation QoS map.
cos-traffic-class Specifies to report on all CoS-to-Traffic Class QoS maps.
name Specifies to report on only the named CoS-to-Traffic Class QoS map.
Defaults The default behavior without any specified operands is to report on all defined QoS maps.
Command
Modes
Privileged EXEC mode
EXEC mode
Description Use this command to display information on the defined QoS maps. For each QoS map, the
configuration state is displayed with a list of all interfaces bound to the QoS map.
Usage
Guidelines
None
Examples To display information on the defined QoS maps:
switch#show qos maps
CoS-to-CoS Mutation map 'test'
In-CoS: 0 1 2 3 4 5 6 7
--------------------------------
Out-CoS: 0 1 2 3 5 4 6 7
Enabled on the following interfaces:
Te 0/5
CoS-to-Traffic Class map 'test'
Out-CoS: 0 1 2 3 4 5 6 7
-------------------------------------
TrafficClass: 0 1 2 3 5 4 6 7
Enabled on the following interfaces:
Te 0/5
See Also qos map cos-mutation, show qos interface