Technical data

Converged Enhanced Ethernet Command Reference 3
53-1002508-01
CEE command line interface
1
NOTE
While this example uses the admin role to log in to the switch, any role listed in the “CEE CLI RBAC
permissions” section can be used.
switch login: admin
Password:
switch:admin> cmsh
switch#
To return to the Fabric OS CLI, enter the following command.
switch#exit
switch:admin>
NOTE
Multiple users can use Telnet and issue commands using EXEC mode and privileged EXEC mode.
Accessing the CEE CLI from the Fabric OS shell
To enter the CEE CLI from the Fabric OS shell, enter the following command.
switch:admin> cmsh
switch#
To return to the Fabric OS shell, enter the following command.
switch#exit
switch:admin>
CEE CLI command modes
Figure 1 displays the CEE CLI command mode hierarchy.
FIGURE 1 CEE CLI command mode hierarchy
Table 3 lists the CEE CLI command modes and describes how to access them.
Protocol configurationInterface configuration
Port-channel
10-Gigabit Ethernet
VLAN
CEE CLI features
CEE map
ACLs
Console and VTY (line)
configuration
Console
Virtual terminal
Global configuration
EXEC
Privileged EXEC
LLDP
Spanning-tree