Technical data

140 Converged Enhanced Ethernet Command Reference
53-1002508-01
rmon event
2
rmon event
Adds or removes an event in the RMON event table associated to the RMON alarm number.
Synopsis rmon event index [description word] [log] [owner name] [trap word]
no rmon event index [description word] [log] [owner name] [trap word]
Operands index Specifies the RMON event number. The range of valid values is from 1
through 65535.
description word Specifies a description of the event.
log Generates an RMON log when an event is triggered.
owner name Specifies the owner of the event. The maximum number of characters is 32.
trap word Specifies the SNMP community or string name to identify this trap.
Defaults There are no events configured.
Command
Modes
Global configuration mode
Description Use this command to add or remove an event in the RMON event table that is associated with an
RMON alarm number. Use the no rmon event command to remove the event configuration.
Usage
Guidelines
None
Examples To configure an RMON event:
switch(config)#rmon event 2 log description “My Errorstoday” owner gjack
See Also show rmon