Technical data

138 Converged Enhanced Ethernet Command Reference
53-1002508-01
rmon alarm
2
rmon alarm
Sets alarm conditions.
Synopsis rmon alarm index snmp_oid interval seconds {absolute | delta} rising-threshold value event
number falling-threshold value event number owner name
no rmon alarm index snmp_oid interval seconds {absolute | delta} rising-threshold value event
number [falling-threshold value event number owner name
Operands index Specifies the alarm index. The range of valid values is from 1 through 65535.
snmp_oid Specifies the MIB object to monitor. The variable must be in the SNMP OID
format, for example, 1.3.6.1.2.1.16.1.1.1.5.65535. The object type must be a
counter32.
interval seconds Specifies the alarm sample interval in seconds. The range of valid values is
from 1 through 2147483648.
absolute Sets the sample type as absolute.
delta Sets the sample type as delta.
rising-threshold value
Specifies the alarm rising threshold. The range of valid values is from 0
through 4294967295.
event number Specifies the event for the rising alarm. The range of valid values is from 1
through 65535.
falling-threshold value
Specifies the alarm falling threshold. The range of valid values is from 0
through 4294967295.
event number Specifies the event for the falling alarm. The range of valid values is from 1
through 65535.
owner name Specifies the identity of the owner. The maximum number of characters is 32.
Defaults There are no alarms configured.
Command
Modes
Global configuration mode
Description Use this command to set alarm conditions. Use the no rmon alarm command to disable the alarm
conditions.
Usage
Guidelines
None
Examples
To set alarm conditions:
switch(config)#rmon alarm 100 1.3.6.1.2.1.16.1.1.1.5.65535 interval 5 absolute
rising-threshold 10000 event 100 falling-threshold 1000 event 101 owner admin
See Also rmon event, show rmon