Technical data

Converged Enhanced Ethernet Command Reference 131
53-1002508-01
qos rcv-queue multicast threshold
2
qos rcv-queue multicast threshold
Configures a limit on the maximum queue depth for multicast packet expansion queues.
Synopsis qos rcv-queue multicast threshold mTC0 mTC1 mTC2 mTC3
no qos rcv-queue multicast threshold
Operands mTC0 Sets the Tail Drop Threshold for multicast Traffic Class 0 packet expansion
queue in units of packets (pkt). The range of valid values is from 0 through
16383 packets.
mTC1 Sets the Tail Drop Threshold for multicast Traffic Class 1 packet expansion
queue in units of packets (pkt). The range of valid values is from 0 through
16383 packets.
mTC2 Sets the Tail Drop Threshold for multicast Traffic Class 2 packet expansion
queue in units of packets (pkt). The range of valid values is from 0 through
16383 packets.
mTC3 Sets the Tail Drop Threshold for multicast Traffic Class 3 packet expansion
queue in units of packets (pkt). The range of valid values is from 0 through
16383 packets.
Defaults The default is 64 packets for each multicast Traffic Class.
Command
Modes
Global configuration mode
Description Use this command to configure a limit on the maximum queue depth for multicast packet
expansion queues. The individual Tail Drop Threshold is specified for each of the four multicast
traffic classes. These Tail Drop Thresholds are applied uniformly across the entire system. These
queue depths are enforced independently by each switch. Use the no qos rcv-queue multicast
threshold command to return the multicast expansion queues to the default value.
Usage
Guidelines
None
Examples To increase the multicast packet expansion Tail Drop Threshold to 1000 pkt for each multicast
Traffic Class:
switch(config)#qos rcv-queue multicast threshold 1000 1000 1000 1000 1000 1000
1000 1000
To return the system to the default multicast packet expansion Tail Drop Threshold value:
switch(config)#no qos rcv-queue multicast threshold
See Also qos rcv-queue multicast rate-limit