Technical data

114 Converged Enhanced Ethernet Command Reference
53-1002508-01
port-channel path-cost
2
port-channel path-cost
Sets the path-cost behavior.
Synopsis port-channel path-cost {custom | standard}
Operands custom Specifies to use the custom behavior, which sets the path-cost changes
according to the port-channel’s bandwidth.
standard Specifies to use the standard behavior, which sets that the path-cost does not
change according to the port-channel’s bandwidth.
Defaults The default path-cost is standard.
Command
Modes
Spanning Tree Protocol configuration mode
Description Use this command to set the path-cost behavior for the port-channel.
Usage
Guidelines
None
Examples To set the behavior for the path-cost to custom:
switch(conf-mstp)#port-channel path-cost custom
To set the behavior for the path-cost to standard:
switch(conf-mstp)#port-channel path-cost standard
See Also None