Technical data

Converged Enhanced Ethernet Command Reference 91
53-1002508-01
iscsi-priority-bits
2
iscsi-priority-bits
Sets the iSCSI priority bitmap.
Synopsis iscsi-priority-bits list value_1 value_2 value_3 value_4 value_5 value_6 value_7
no iscsi-priority-bits
Operands value_1 The first priority bitmap value. The valid range of values is from 0 through 7.
value_2 The second priority bitmap value. The valid range of values is from 0 through
7.
value_3 The third priority bitmap value. The valid range of values is from 0 through 7.
value_4 The fourth priority bitmap value. The valid range of values is from 0 through 7.
value_5 The fifth priority bitmap value. The valid range of values is from 0 through 7.
value_6 The sixth priority bitmap value. The valid range of values is from 0 through 7.
value_7 The seventh priority bitmap value. The valid range of values is from 0 through
7.
Defaults The default value for all value entries is 4.
Command
Modes
Protocol LLDP configuration mode
Description This command allows the user to set the iSCSI priority bitmap for use in the DCBX iSCSI TLV. Use
the no iscsi-priority-bits command to return to the default value.
Usage
Guidelines
None
Examples None
See Also None