Network Cables User Manual

Brocade Adapters Administrator’s Guide 53
53-1001256-01
Chapter
5
Monitoring
In this chapter
•Performance monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
•Master Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
•Application log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Performance monitoring
The Host Connectivity Manager (HCM) Port Statistics window enables you to monitor the
performance of the CNA and the traffic between the CNA and the LUNs. You can use the
information to isolate and troubleshoot areas that impact application performance.
The components listed in Table 9 display statistics when the FCoE port node is selected. Refer to
“HCM Dialog Boxes” on page 75 for a description of each statistics field.
TABLE 9 Statistics monitored by component
Component Statistics monitored
Local host • Port
HBA
• Port
HBA port
• Port
• Fabric
• IOC
• QoS
• Authentication
CNA
• Port
CEE port
• Port
• CEE
• FCP IM Module
Ethernet port
• Eth IOC
• VLAN
• Eth
FCoE port
• Fabric
• IOC
Logical port and base port
• Logical port
Virtual port
• Logical port
• Virtual port