User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 895
53-1002581-01
Configuring 802.1X Port Authentication
41
FIGURE 223 Configuring Interface Settings for 802.1X Port Supplicant
Displaying 802.1X Statistics
Use the Security > Port Authentication (Show Statistics) page to display statistics for dot1x protocol
exchanges for any port.
CLI References
• “show dot1x” on page 186
Parameters
These parameters are displayed:
TABLE 169 802.1X Statistics
Parameter Description
Authenticator
Rx EAPOL Start The number of EAPOL Start frames that have been received by this
Authenticator.
Rx EAPOL Logoff The number of EAPOL Logoff frames that have been received by this
Authenticator.
Rx EAPOL Invalid The number of EAPOL frames that have been received by this
Authenticator in which the frame type is not recognized.
Rx EAPOL Total The number of valid EAPOL frames of any type that have been
received by this Authenticator.
Rx Last EAPOLVer The protocol version number carried in the most recent EAPOL frame
received by this Authenticator.
Rx Last EAPOLSrc The source MAC address carried in the most recent EAPOL frame
received by this Authenticator.
Rx EAP Resp/Id The number of EAP Resp/Id frames that have been received by this
Authenticator.