User guide

640 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Navigating the Web Browser Interface
31
Show Rule
Shows the rules specified for an ACL 861
Configure Interface
Configure
Binds a port to the specified ACL and time range 873
Add Mirror
MIrrors matching traffic to the specified port 874
Show Mirror
Shows ACLs mirrored to specified port 874
Show Hardware Counters
Shows statistics for ACL hardware counters 875
ARP Inspection 876
Configure General
Enables inspection globally, configures validation of additional address
components, and sets the log rate for packet inspection
877
Configure VLAN
Enables ARP inspection on specified VLANs 879
Configure Interface
Sets the trust mode for ports, and sets the rate
limit for packet inspection
880
Show Information
Show Statistics
Displays statistics on the inspection process 881
Show Log
Shows the inspection log list 882
IP Filter 883
Add
Sets IP addresses of clients allowed management access via the web,
SNMP, and Telnet
883
Show
Shows the addresses to be allowed management access 883
Port Security Configures per port security, including status, response for security
breach, and maximum allowed MAC addresses
885
Port Authentication IEEE 802.1X 887
Configure Global
Enables authentication and EAPOL pass-through 888
Configure Interface
Sets authentication parameters for individual ports 890
Show Statistics
Displays protocol statistics for the selected port 895
IP Source Guard Filters IP traffic based on static entries in the IP Source Guard table, or
dynamic entries in the DHCP Snooping table
898
Port Configuration
Enables IP source guard and selects filter type per port 898
Static Binding
900
Add
Adds a static addresses to the source-guard binding table 900
Show
Shows static addresses in the source-guard binding table 900
Dynamic Binding
Displays the source-guard binding table for a selected interface 902
Administration 911
Log 911
System
911
Configure Global
Stores error messages in local memory 911
Show System Logs
Shows logged error messages 911
Remote
Configures the logging of messages to a remote logging process 914
TABLE 151 Switch Main Menu (Continued)
Menu Description Page