User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 639
53-1002581-01
Navigating the Web Browser Interface
31
Network Access MAC address-based network access authentication 839
Configure Global
Enables aging for authenticated MAC addresses, and sets the time period
after which a connected MAC address must be reauthenticated
841
Configure Interface
842
General
Enables MAC authentication on a port; sets the maximum number of
address that can be authenticated, the guest VLAN, dynamic VLAN and
dynamic QoS
842
Link Detection
Configures detection of changes in link status, and the response (i.e.,
send trap or shut down port)
843
Configure MAC Filter
844
Add
Specifies MAC addresses exempt from authentication 844
Show
Shows the list of exempt MAC addresses 844
Show Information
Shows the authenticated MAC address list 845
HTTPS Secure HTTP 847
Configure Global
Enables HTTPs, and specifies the UDP port to use 847
Copy Certificate
Replaces the default secure-site certificate 848
SSH Secure Shell 850
Configure Global
Configures SSH server settings 852
Configure Host Key
853
Generate
Generates the host key pair (public and private) 853
Show
Displays RSA and DSA host keys; deletes host keys 853
Configure User Key
854
Copy
Imports user public keys from TFTP server 854
Show
Displays RSA and DSA user keys; deletes user keys 854
ACL Access Control Lists 856
Configure Time Range
Configures the time to apply an ACL 857
Add
Specifies the name of a time range 857
Show
Shows the name of configured time ranges 857
Add Rule
857
Absolute
Sets exact time or time range 857
Periodic
Sets a recurrent time 857
Show Rule
Shows the time specified by a rule 857
Configure ACL
861
Show TCAM
Shows utilization parameters for TCAM 860
Add
Adds an ACL based on IP or MAC address filtering 861
Show
Shows the name and type of configured ACLs 861
Add Rule
Configures packet filtering based on IP or MAC addresses and other
packet attributes
861
TABLE 151 Switch Main Menu (Continued)
Menu Description Page