User guide

636 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Navigating the Web Browser Interface
31
Mirror Mirrors traffic matching a specified source address from any port on the
switch to a target port
756
Spanning Tree 759
Loopback Detection Configures Loopback Detection parameters 761
STA Spanning Tree Algorithm
Configure Global
Configure
Configures global bridge settings for STP, RSTP and MSTP 763
Show Information
Displays STA values used for the bridge 767
Configure Interface
Configure
Configures interface settings for STA 768
Show Inform at on
Displays interface settings for STA 771
MSTP Multiple Spanning Tree Algorithm 774
Configure Global
774
Add
Configures initial VLAN and priority for an MST instance 774
Modify
Configures the priority or an MST instance 774
Show
Configures global settings for an MST instance 774
Add Member
Adds VLAN members for an MST instance 774
Show Member
Adds or deletes VLAN members for an MST instance 774
Show Information
Displays MSTP values used for the bridge 774
Configure Interface
777
Configure
Configures interface settings for an MST instance 777
Show Information
Displays interface settings for an MST instance 777
Traffic
Rate Limit Sets the input and output rate limits for a port 781
Storm Control Sets the broadcast storm threshold for each interface 782
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port
784
Configure Global
Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold
785
Configure Interface
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
786
Priority
Default Priority
Sets the default priority for each port or trunk 789
Queue
Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
790
Trust Mode
Selects DSCP or CoS priority processing 795
TABLE 151 Switch Main Menu (Continued)
Menu Description Page