User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 599
53-1002581-01
IPv6 Interface
29
Example
This example displays all entries in the ARP cache.
Console#show arp
ARP Cache Timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
10.1.0.0 FF-FF-FF-FF-FF-FF other VLAN1
10.1.0.254 00-00-AB-CD-00-00 other VLAN1
10.1.0.255 FF-FF-FF-FF-FF-FF other VLAN1
145.30.20.23 09-50-40-30-20-10 dynamic VLAN3
Total entry : 5
Console#
IPv6 Interface
This switch supports the following IPv6 interface commands.
TABLE 144 IPv6 Configuration Commands
Command Function Mode
Interface Address Configuration and Utilities
ipv6 default-gateway Sets an IPv6 default gateway for traffic GC
ipv6 address Configures an IPv6 global unicast address, and enables IPv6 on an
interface
IC
ipv6 address autoconfig Enables automatic configuration of IPv6 addresses on an interface
and enables IPv6 on the interface
IC
ipv6 address eui-64 Configures an IPv6 global unicast address for an interface using an
EUI-64 interface ID in the low order 64 bits, and enables IPv6 on the
interface
IC
ipv6 address link-local Configures an IPv6 link-local address for an interface and enables IPv6
on the interface
IC
ipv6 enable Enables IPv6 on an interface that has not been configured with an
explicit IPv6 address
IC
ipv6 mtu Sets the size of the maximum transmission unit (MTU) for IPv6 packets
sent on an interface
IC
show ipv6 default-gateway Displays the current IPv6 default gateway NE, PE
show ipv6 interface Displays the usability and configured settings for IPv6 interfaces NE, PE
show ipv6 mtu Displays maximum transmission unit (MTU) information for IPv6
interfaces
NE, PE
show ipv6 traffic Displays statistics about IPv6 traffic NE, PE
clear ipv6 traffic Resets IPv6 traffic counters PE
ping6 Sends IPv6 ICMP echo request packets to another node on the
network
PE
traceroute6 Shows the route packets take to the specified host
PE