User guide

554 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
CFM Commands
25
Example
This example sends a link trace message to the specified MEP with a maximum hop count of 25.
Console#linktrace ethernet dest-mep 2 md voip ma rd ttl 25
Console#
clear ethernet cfm linktrace-cache
This command clears link trace messages logged on this device.
Command Mode
Privileged Exec
Example
Console#clear ethernet cfm linktrace-cache
Console#
show ethernet cfm linktrace-cache
This command displays the contents of the link trace cache.
Command Mode
Privileged Exec
Example
Console#show ethernet cfm linktrace-cache
Hops MA IP / Alias Ingress MAC Ing. Action Relay
Forwarded Egress MAC Egr. Action
---- -------------- ----------------------- ----------------- ----------- -----
2 rd 192.168.0.6 00-12-CF-12-12-2D ingOk Hit
Not Forwarded
Console#
TABLE 129 show ethernet cfm linktrace-cache - display description
Field Description
Hops The number hops taken to reach the target MEP.
MA Name of the MA to which this device belongs.
IP/Alias IP address or alias of the target device.
Forwarded Shows whether or not this link trace message was forwarded. A message is not
forwarded if received by the target MEP.
Ingress MAC MAC address of the ingress port on the target device.
Egress MAC MAC address of the egress port on the target device.