User guide

156 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
AAA
9
aaa accounting update
This command enables the sending of periodic updates to the accounting server. Use the no form
to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim accounting records
for all users on the system.
• Using the command without specifying an interim interval enables updates, but does not
change the current interval setting.
Example
Console(config)#aaa accounting update periodic 30
Console(config)#
aaa authorization exec
This command enables the authorization for Exec access. Use the no form to disable the
authorization service.
Syntax
aaa authorization exec {default | method-name}
group {tacacs+ | server-group}
no aaa authorization exec {default | method-name}
default - Specifies the default authorization method for Exec access.
method-name - Specifies an authorization method for Exec access. (Range: 1-64
characters)
group - Specifies the server group to use.
tacacs+ - Specifies all TACACS+ hosts configured with the tacacs-server host
command.
server-group - Specifies the name of a server group configured with the aaa group
server command. (Range: 1-64 characters)