User guide

122 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
SNMP Commands
6
show snmp view
This command shows information on the SNMP views.
Command Mode
Privileged Exec
Example
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
nlm
This command enables or disables the specified notification log.
Syntax
[no] nlm filter-name
filter-name - Notification log name. (Range: 1-32 characters)
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• Notification logging is enabled by default, but will not start recording information until a logging
profile specified by the snmp-server notify-filter command is enabled by the nlm command.
• Disabling logging with this command does not delete the entries stored in the notification log.
TABLE 30 show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.