User guide

110 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
SNMP Commands
6
snmp-server contact
This command sets the system contact string. Use the no form to remove the system contact
information.
Syntax
snmp-server contact string
no snmp-server contact
string - String that describes the system contact information. (Maximum length:
255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server contact Paul
Console(config)#
Related Commands
snmp-server location (110)
snmp-server location
This command sets the system location string. Use the no form to remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#snmp-server location WC-19
Console(config)#
Related Commands
snmp-server contact (110)