User guide

84 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Event Logging
5
Parity : None
Stop Bits : 1
VTY Configuration:
Password Threshold : 3 times
Inactive Timeout : 600 seconds
Login Timeout : 300 sec.
Silent Time : Disabled
Console#
Event Logging
This section describes commands used to configure event logging on the switch.
logging facility
This command sets the facility type for remote logging of syslog messages. Use the no form to
return the type to the default.
Syntax
logging facility type
no logging facility
type - A number that indicates the facility used by the syslog server to dispatch log
messages to an appropriate service. (Range: 16-23)
Default Setting
23
Command Mode
Global Configuration
TABLE 18 Event Logging Commands
Command Function Mode
logging facility Sets the facility type for remote logging of syslog messages GC
logging history Limits syslog messages saved to switch memory based on severity GC
logging host Adds a syslog server host IP address that will receive logging
messages
GC
logging on Controls logging of error messages GC
logging trap Limits syslog messages saved to a remote server based on severity GC
clear log Clears messages from the logging buffer PE
show log Displays log messages PE
show logging Displays the state of logging PE