User guide

66 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
File Management
5
boot system
This command specifies the file or image used to start up the system.
Syntax
boot system {boot-rom | config | opcode}: filename
boot-rom* - Boot ROM.
config* - Configuration file.
opcode* - Run-time operation code.
filename - Name of configuration file or code image.
* The colon (:) is required.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• A colon (:) is required after the specified file type.
• If the file contains an error, it cannot be set as the default file.
Example
Console(config)#boot system config: startup
Console(config)#
Related Commands
dir (70)
whichboot (71)
Automatic Code Upgrade Commands
upgrade opcode auto Automatically upgrades the current image when a new version is
detected on the indicated server
GC
upgrade opcode path Specifies an FTP/TFTP server and directory in which the new opcode is
stored
GC
upgrade opcode reload Reloads the switch automatically after the opcode upgrade is
completed
GC
show upgrade Shows the opcode upgrade configuration settings. PE
TABLE 15 Flash/File Commands (Continued)
Command Function Mode