User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 1091

53-1002581-01

Multicast VLAN Registration for IPv4

• VLAN – The VLAN through which the service is received. Note that this may be different from

the MVR VLAN if the group address has been statically assigned.

• Port – Shows the interfaces with subscribers for multicast services provided through the MVR

VLAN.

• Up Time – Time this service has been forwarded to attached clients.

• Expire – Time before this entry expires if no membership report is received from currently

active or new clients.

• Count – The number of multicast services currently being forwarded from the MVR VLAN.

Interface

To display the interfaces assigned to the MVR receiver groups:

1. Click Multicast, MVR.

2. Select Show Member from the Step list.

3. Select an MVR domain.

FIGURE 382 Displaying MVR Receiver Groups

Displaying MVR Statistics

Use the Multicast > MVR > Show Statistics pages to display MVR protocol-related statistics for the

specified interface.

CLI References

• “show mvr statistics” on page 489

Parameters

These parameters are displayed:

• Domain ID – An independent multicast domain. (Range: 1-5)

• VLAN – VLAN identifier. (Range: 1-4093)

• Port – Port identifier. (Range: 1-12)

• Trunk – Trunk identifier. (Range: 1-12)