User guide

64 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Frame Size
5
show version
This command displays hardware and software version information for the system.
Command Mode
Normal Exec, Privileged Exec
Command Usage
See “Displaying Hardware/Software Versions” on page 650 for detailed information on the items
displayed by this command.
Example
Console#show version
Unit 1
Serial Number : S123456
Hardware Version : R0A
EPLD Version : 0.01
Number of Ports : 12
Main Power Status : Up
Redundant Power Status : Not present
Role : Master
Loader Version : 0.0.1.4
Linux Kernel Version : 2.6.22.18
Operation Code Version : 1.1.0.2
Console#
Frame Size
This section describes commands used to configure the Ethernet frame size on the switch.
jumbo frame
This command enables support for layer 2 jumbo frames for Gigabit Ethernet ports. Use the no
form to disable it.
Syntax
[no] jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
TABLE 14 Frame Size Commands
Command Function Mode
jumbo frame Enables support for jumbo frames GC