User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 1039
53-1002581-01
Address Resolution Protocol
43
Displaying ARP Entries
Use the IP > ARP (Show Information) page to display dynamic entries in the ARP cache . The ARP
cache contains entries for local interfaces, including subnet, host, and broadcast addresses. These
entries are dynamically learned through replies to broadcast
messages.
CLI References
• “show arp” on page 598
• “clear arp-cache” on page 598
Interface
To display all dynamic entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
3. Click Dynamic Address.
FIGURE 334 Displaying ARP Entries
To display all local entries in the ARP cache:
1. Click IP, ARP.
2. Select Show Information from the Step List.
3. Click Other Address.
FIGURE 335 Displaying Local ARP Entries