User guide

Brocade 6910 Ethernet Access Switch Configuration Guide 999
53-1002581-01
Connectivity Fault Management
42
• Crosscheck Status – Shows if crosscheck function has been enabled.
Interface
To show detailed information for remote MEPs:
1. Click Administration, CFM.
2. Select Show Information from the Step list.
3. Select Show Remote MEP Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Select a MEP ID.
FIGURE 306 Showing Detailed Information on Remote MEPs
Displaying the Link Trace Cache
Use the Administration > CFM > Show Information (Show Link Trace Cache) page to show
information about link trace operations launched from this device.
CLI References
• “show ethernet cfm linktrace-cache” on page 554
Parameters
These parameters are displayed:
• Hops – The number hops taken to reach the target MEP.