User guide

984 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002581-01
Connectivity Fault Management
42
4. Select an entry from the MD Index list.
FIGURE 293 Showing Maintenance Associations
To configure detailed settings for maintenance associations:
1. Click Administration, CFM.
2. Select Configure MA from the Step list.
3. Select Configure Details from the Action list.
4. Select an entry from MD Index and MA Index.
5. Specify the CCM interval, enable the transmission of connectivity check and cross check
messages, and configure the required AIS parameters.
6. Click Apply
FIGURE 294 Configuring Detailed Settings for Maintenance Associations