Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 9 of 79
Feature Description See the FastIron
Configuration Guide, section
entitled...
New SNMP MIBs SNMP MIB support has been added for the
following features:
• 802.1x authentication
• Support for MIBs in RFC 2932, RFC 2933
and RFC 2934
• Power Over Ethernet MIB with the
following table:
• snAgentPoeUnitTable (stacking
systems)
IronWare MIB Reference Guide
Summary of enhancements in FGS R07.2.02
Table 3 lists the enhancements in software release 07.2.02 for FGS, FGS-STK, FLS, FLS-STK, and FWS
devices.
Table 3 Enhancements in FGS R07.2.02
Feature Description See the FastIron
Configuration Guide, section
entitled...
Fast Uplink Span Fast Uplink Span transitions the forwarding of
traffic to one of the redundant ports in the Fast
Uplink Span group in one second bypassing
listening and learning port states.
“Fast Uplink Span”
Multi-range VLANs The multi-range VLAN feature allows you to use
a single command to create and configure
multiple VLANs.
“Multi-range VLAN”
DHCP Server All FastIron devices can be configured to
operate as a DHCP server. A DHCP server
allocates IP addresses for specified periods of
time (known as leases) and manages the IP
address pools and the binding (leased
addresses) database.
“DHCP Server”