Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 54 of 79
Defect ID:
DEFECT000388009
Technical Severity:
Medium
Summary:
DNS resolution does not work when multiple DNS domain lists are used.
Symptom:
If several domain names are created using the “ip dns domain-list <name>" command and the first
domain name fails, the device keeps trying to reach it instead of trying the other configured domain
names.
Probability:
High
Feature:
FCX Management Functionality
Function:
HTTPs/HTTP
Reported In Release:
FI 07.2.02
Service Request ID:
697877
Defect ID:
DEFECT000388082
Technical Severity:
Medium
Summary:
Broadcast traffic (DHCP Discovery) sent by PVLAN community port is duplicated in primary port
and other PVLAN community ports.
Symptom:
Two packets may be received instead of one since they are being duplicated.
Probability:
Medium
Feature:
FCX L2 Forwarding
Function:
Private VLAN
Reported In Release:
FI 07.2.02
Service Request ID:
680201
Defect ID:
DEFECT000390164
Technical Severity:
Medium
Summary:
ICMP packets are not flooded if ICMP Burst protection is configured on a VE interface.
Symptom:
If "ip icmp burst" command is configured on a VE interface, ICMP packets are not flooded within the
associated VLAN.
Probability:
Medium
Feature:
FI ACL
Function:
ACL based rate limitting
Reported In Release:
FI 07.3.00
Service Request ID:
704591
Defect ID:
DEFECT000390792
Technical Severity:
High
Summary:
SX800 experiences high CPU utilization when routing IP packets through ve interfaces in subnet
VLANs.
Symptom:
SX800 experiences high CPU utilization when routing IP packets through ve interfaces in subnet
VLANs as all routed packets are routed in software by the CPU instead of in hardware by ASICs.
Probability:
Low
Feature:
SX L2 Forwarding
Function:
Subnet VLAN
Reported In Release:
FI 07.2.02
Service Request ID:
711367
Defect ID:
DEFECT000391791
Technical Severity:
Medium
Summary:
If the same VSRP VRID is used in multiple VLANs, then changes made under one VLAN can affect a
different VLAN with the same VSRP VRID.
Symptom:
If the same VSRP VRID is used in multiple VLANs, then changes made under one VLAN can affect a
different VLAN with the same VSRP VRID.
Workaround:
Do not use the same VSRP VRID in multiple VLANs.
Probability:
Medium
Feature:
FCX L2 Control
Function:
VSRP(master and aware)
Reported In Release:
FI 07.2.02
Service Request ID:
713975