Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 53 of 79
Defect ID:
DEFECT000355892
Technical Severity:
High
Summary:
The command “no snmp-server comm Public ro” is not retained after a reload.
Symptom:
When using the command “no snmp-server comm Public ro” the public community will be disabled
and the device will no longer respond to SNMP requests using the Public community. However it is
not placed in the running config or retained after a reload. Once the Device reloads it will begin to
respond to polling and read only operations using this community.
Probability:
Low
Feature:
FI Embedded Management
Function:
SNMP v1/v2/v3
Reported In Release:
FI 07.3.00
Service Request ID:
628995
Defect ID:
DEFECT000358890
Technical Severity:
Critical
Summary:
SX1600 may reset when launching an SSHv2 session after a hitless reload.
Symptom:
SX1600 may reset when launching an SSHv2 session after a hitless reload.
Probability:
High
Feature:
FI Embedded Management
Function:
SSHV2/SCP
Reported In Release:
FI 07.3.00
Service Request ID:
728893
Defect ID:
DEFECT000364344
Technical Severity:
Medium
Summary:
When downloading an application image via TFTP, the length of the image name plus its directory
location cannot exceed 32 characters.
Symptom:
When using the "copy tftp flash <IP-address> <Image-file>" command, the directory containing the
image file on the TFTP server can be specified. If the length of the directory name plus the image
name exceeds 32 characters, the TFTP copy command will fail.
Workaround:
Do not use the directory name in the "copy tftp flash" command.
Probability:
Medium
Feature:
FI Embedded Management
Function:
CLI and parser
Reported In Release:
FI 07.3.00
Service Request ID:
686721
Defect ID:
DEFECT000382536
Technical Severity:
Medium
Summary:
CPU memory usage increases with repetitive SSH sessions.
Symptom:
With continuous creation and deletion of SSH sessions to the device, the memory usage steadily
increases and does not recover.
Probability:
Low
Feature:
FI Embedded Management
Function:
SSH/SCP
Reported In Release:
FI 07.4.00
Service Request ID:
704159
Defect ID:
DEFECT000383069
Technical Severity:
High
Summary:
TCAM entries are not updated on Standby/Member units for a static ECMP Route when there is MAC
movement.
Symptom:
When MAC movement for a static ECMP route occurs, traffic that is received on Standby or Member
unit continues to be forwarded to the old port.
Probability:
High
Feature:
Layer 3 Forwarding - IPV4
Function:
Data Forwarding (IPV4)
Reported In Release:
FI 07.4.00
Service Request ID:
697721