Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 48 of 79
Defect ID:
DEFECT000448413
Technical Severity:
Medium
Summary:
During boot up, a few characters at the start of syslog messages may be omitted.
Symptom:
When the FastIron device is reloaded, some of the initial characters are omitted for the first few Syslog
messages. After some period of time, the messages are generated correctly.
Probability:
Medium
Risk of Fix:
Medium
Feature:
FI Embedded Management
Function:
SYSLOG
Reported In Release:
FI 07.3.00
Service Request ID:
1135927
Defect ID:
DEFECT000448876
Technical Severity:
Medium
Summary:
IP Cache is not updated from DROP to FORWARD after DHCP snooping and ARP are received.
Symptom:
Traffic loss to certain destinations when traffic transits through a VRRP backup device and when
DHCP snooping is enabled on the incoming interface.
Probability:
Low
Risk of Fix:
Medium
Feature:
SX L2 Forwarding
Function:
MAC Table/FDB Manager
Reported In Release:
FI 07.2.00
Service Request ID:
1105581
Defect ID:
DEFECT000452027
Technical Severity:
Medium
Summary:
The "show aaa" command output is not accurate for certain fields.
Symptom:
Certain fields in the “show aaa” command output do not appear to increment or change state in
response to user logins. Specifically, the lines “opens=0 closes=0 timeouts=0 errors=0” and “no
connection” do not change in response to successful user logins.
Probability:
High
Risk of Fix:
Medium
Feature:
FI Embedded Management
Function:
AAA RADIUS/TACACS+ V4/V6
Reported In Release:
FI 07.4.00
Service Request ID:
1154018
Defect ID:
DEFECT000455532
Technical Severity:
High
Summary:
Routes that should be matching the default route are instead displaying error message "No info to
print".
Symptom:
The “show ip route” command output may have several entries of "No info to print" and “show ip
route x.x.x.x” command output for routes that should match the default route are showing "No info to
print", which causes traffic loss.
Feature:
SX Layer 3 Forwarding - IPV4
Function:
Data Forwarding (IPV4)
Reported In Release:
FI 07.2.02
Service Request ID:
1145828
Defect ID:
DEFECT000461953
Technical Severity:
Medium
Summary:
SNMPv3 Engine Time is slower than it should be on devices running firmware version 7.2.02h.
Symptom:
SNMPv3 Engine Time is slower than it should be on devices running firmware version 7.2.02h.
Probability:
High
Feature:
FCX Network Management
Function:
SNMP V4/V6
Reported In Release:
FI 07.2.02
Service Request ID:
1149710