Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 47 of 79
Defect ID:
DEFECT000412264
Technical Severity:
Medium
Summary:
[SX] Error message is printed while loading boot image for 7202X code.
Symptom:
Error message is printed while loading boot image for 7202X code.
Feature:
SX_SYSTEM
Function:
UNDETERMINED
Reported In Release:
FI 07.2.02
Service Request ID:
1095368
Defect ID:
DEFECT000414072
Technical Severity:
Medium
Summary:
Unable to reload the switches using IPv6 SNMP.
Symptom:
Unable to reload the switches using IPv6 SNMP.
Probability:
High
Risk of Fix:
Medium
Feature:
FCX Network Management
Function:
SNMP V4/V6
Reported In Release:
FI 07.3.00
Service Request ID:
760347
Defect ID:
DEFECT000422319
Technical Severity:
Medium
Summary:
The "ip tcp keepalive" command may not work for IPv6.
Symptom:
The "ip tcp keepalive" command for IPv6 may not work and it may not show in running configuration.
Probability:
High
Feature:
FCX Layer 3 Forwarding - IPV6
Function:
Data Forwarding (IPV6)
Reported In Release:
FI 07.2.02
Service Request ID:
1085918
Defect ID:
DEFECT000428623
Technical Severity:
Medium
Summary:
CDP packet from a Brocade device has one missing field, and one wrong field.
Symptom:
You are unable to see the hostname in the CDP packet for the location services.
Probability:
High
Risk of Fix:
Medium
Feature:
FI Embedded Management
Function:
LLDP
Reported In Release:
FI 07.4.00
Defect ID:
DEFECT000432681
Technical Severity:
High
Summary:
Configured IPv6 addresses are deleted when addresses learned from Router Advertisements expire.
Symptom:
When the lifetime of an IPv6 address that is auto-learned through Router Advertisements expires, then
the configured addresses are deleted along with the auto-learned addresses.
Workaround:
Reboot the device. It will recover and the configured address will take effect from the
configuration.
Probability:
High
Risk of Fix:
Low
Feature:
FCX Layer 3 Forwarding - IPV6
Function:
ECMP (IPV6)
Reported In Release:
FI 07.3.00
Service Request ID:
1111827
Defect ID:
DEFECT000443109
Technical Severity:
Medium
Summary:
You are unable to configure parameters for warning temperature on FESX devices running firmware
version 7.2.02 and later.
Symptom:
You are unable to configure parameters for warning temperature on FESX devices running firmware
version 7.2.02 and later.
Feature:
SX Platform Specific features
Function:
Chassis/fan/powersupplies/temperature
sensors
Reported In Release:
FI 07.2.02
Service Request ID:
1137834