Technical data

IronWare Software Release 07.2.02j for Brocade FastIron switches
Release Notes v 1.0 Page 38 of 79
Software image files for IronWare release R07.2.02j
Table 17 lists the software image files that are available for IronWare Release 07.2.02j.
Table 17 Software image files
Device Boot Image Flash Image
FESX
SuperX
FSX 800
FSX 1600
SXZ07200.bin
SXS07202j.bin (Layer 2) or
SXL07202j.bin (base Layer 3) or
SXR07202j.bin (full Layer 3)
FGS
FLS
FWS
FGZ05000.bin FGS07202j.bin (Layer 2) or
FGSL07202j.bin (base Layer 3) or
FGSR07202j.bin (edge Layer 3)
FGS-STK
FLS-STK
FGZ05000.bin FGS07202j.bin (Layer 2) or
FGSL07202j.bin (base Layer 3)
FCX GRZ07100.bin FCXS07202j.bin (Layer 2) or
FCXR07202j.bin (Layer 3)
Factory pre-loaded software
Table 18 lists the software that is factory-loaded into the primary and secondary flash areas on the
device.
NOTE: Devices with 8MB of flash memory, including FGS, FLS and FESX devices, can only store a primary
image. FCX and SX devices can store one Full Layer 3 image or two Layer 2 or Base Layer 3 images.
Table 18 Factory pre-loaded software
Model
Software Images
Primary Flash Secondary Flash
FESX
SuperX
FSX 800
FSX 1600
Layer 2 Base Layer 3
FESX PREM
SuperX PREM
FSX 800 PREM
FSX 1600 PREM
Full Layer 3 Layer 2